NEW PICTURE UPDATES AT THE BOTTOM: 5/20/09

There are certain parts of Columbia, South Carolina where the houses are all 60+ years old and typically have leaks and broken boards. We, as a company, make it a policy to inspect the attics whenever we go to a house. I want to know whether or not the wood is in good shape, whether or not the insulation is okay, and whether or not it is leaking and, if so, where. As a homeowner, it wouldn’t do any good to have a roof installed that should last over 30 years if the wood it sits on is in critical condition.

Upon inspection of the house, we found multiple places in the attic where water was getting in and rotting out the wood. Both chimneys had issues as well as the steep valley over the front door –where three roof lines converged. Also, on the back was a small flat roof that had standing water on it –something you definitely want to avoid. The last thing we noticed was that the bathroom vents weren't vented to the outside. They were just sitting on top of the ceiling joists, collecting moisture.

We started by removing the shingles, old tar-paper and the old nails. We then went through and fixed the broken and rotten boards. Next we installed a liner in all of the valleys and covered the house in a fiberglass underlayment –instead of that old #15 or #30 felt.

In the front where the three valleys came together, we installed an angled valley to run the water off, as opposed to it just sitting there and causing problems, like it was before.

Around the big front chimney, we removed all of the old flashing material and installed both step and counter flashing. Black counter, or cap, metal was used to blend in with the color of the shingles. Most roofers around here, for some reason, use regular silver aluminum and then paint it. After a couple of years it looks horrible. Luckily for homeowners, we have found a much better looking way to install it.

As for the small flat roof in the back, we installed new rafters to put a slight slope to the roof and then installed a very heavy grade modified underlayment. Next we will be installing a rubber roof. (in progress)

To ventilate the house, we installed AirVent ShingleVent II ridge vent, which features external baffles. To help homeowners better understand ventilation and what type is best for their house, I’ve written a post,  What Type of Ventilation is Best For Your House. Check it out.

To vent the bathrooms, we simply cut in a vent from the outside and plugged the bathroom vent hose to the bottom of it from the attic.

As you can see, the homeowners picked the perfect color for their house and the finished product is turning out great. I’ll post more pictures as they come in.

If you live in South Carolina and would like for a representative from Bauer Roofing to take a look at your house, please give us a call at 803-955-0374 or fill out our simple Request an Estimate Form and a representative will call you back.

royb

PICTURE UPDATES: